Grating clamp
Grating clamp or clamp is another product produced by Arazin Sanat Arak Company, which we will review in this section.
Before introducing the grating clamp, it is better to take a look at the types of methods that are common in installing grating:
Generally, before producing this product, gratings were installed by welding and concrete casting in their desired location, of course, it should be noted that today, according to the need and conditions of placement, the use of these methods is common and the most important and fundamental difference between them and the method of using clamp is the speed of installation and also the ease of opening or changing part of the route without damage and very low cost.
According to the extensive experience in this field and the need for replacement, relocation or repair of gratings after a period of time, this result was obtained that the installation should be done as much as possible in a way that has the lowest cost and high speed. Therefore, at first, they used screws and nuts to install the gratings, which had disadvantages in strength and installation, and this was how the grating clamp is the best option for installing grating today.
Grating clamp and its components
Grating clamp can be produced with hot and cold galvanized and this product consists of the following parts:
Jaw
Eyebrow (pulley)
Bolt and nut
Washer
In the picture opposite, you can clearly see all the components and how they are connected to each other.
How to install grating clamp
When installing grating with grating clamp, one jaw is placed inside the eyes of the grating and the other jaw is placed under the selected support such as iron beam, flange, etc. Then the eyebrow is fixed on the grating by tightening the bolt and nut and as a result the grating is firmly placed on the desired support.
In the picture opposite, you can see an example of installing grating by this method.
Benefits of clamp
Below you can see the various benefits and advantages of grating clamp:
Fast and easy installation
No damage to the galvanized coating of the grating
Without costly and time-consuming actions such as drilling, welding, hole making, etc.
Possibility of separating a piece of grating in a route without damage
Very reasonable price.
Galvanized coating.
Very high strength.
No need for a large number of clamps (usually four clamps are enough for each piece of grating)
Final word:
Arazin Sanat Arak Company is proud to announce that it produces and manufactures various types of grating clamps with very high quality and reasonable price. If you need and place an order, you can contact the company’s sales experts.
Some other products of Ajineh Sanat Arak Company